Fixing the System_Thread_Exception_Not_Handled stop code error: This error, often abbreviated as BSOD (Blue Screen of Death), disrupts the normal boot process of Windows 11/10, leading to an error message on a blue screen.
Several factors can contribute to this issue, such as software conflicts, incomplete update installations, corrupted system files, virus or malware infections, hardware malfunctions, and registry errors.
While there is no one-size-fits-all solution to resolve this error, there are several potential fixes that can help you recover from it and successfully boot your computer.
Important Note:
Before attempting any significant repairs on your Windows system, it’s crucial to back up your data and store it safely. EaseUS Data Recovery Wizard can help recover data from a malfunctioning computer.
Whether you are facing the scary blue screen of death, startup failures, or boot issues, this tool allows you to get your computer running and recover your valuable data effortlessly. So, make sure to use EaseUS Data Recovery Wizard to protect your files before proceeding with any repairs!
Note: The free version allows you to recover up to 2GB of data.
Solution 1: Disconnect External Devices and Restart
In some cases, the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error may be caused by external devices such as printers, displays, headsets, webcams, portable SSDs, and other devices. To address this issue, try the following steps:
Disconnect unnecessary peripherals: Start by unplugging all non-essential external devices from your computer, including printers, displays, headsets, and any other peripherals.
Restart your computer: After disconnecting the peripherals, perform a simple restart of your computer.
Check if the error is resolved: Upon rebooting, check if the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error persists.
Removing external devices may resolve the issue.
If the error no longer appears after disconnecting these peripherals, you can try reconnecting them one by one to identify the specific device that was causing the problem. This will help you isolate the troublesome hardware.
However, if the error continues even after removing the external devices, you should follow further troubleshooting steps to address potential software, driver, or system issues.
Solution 2: Boot the Computer in Safe Mode
To determine if the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error is caused by a driver issue or software conflict, you can boot your computer in Safe Mode. Safe Mode loads a minimal set of drivers and essential services, helping to isolate the problem. Here’s how to do it:
Boot your computer in Safe Mode
Step 1: Open the Advanced Startup Options.
Step 2: Go to Troubleshoot
Troubleshoot in the Advanced Startup menu for Windows 10 and 11
Step 3: Select Advanced Options
Advanced options for Windows 10 and 11
Step 4: Select Startup Settings
21_Startup Settings
Step 5: Click the Restart button to enable Safe Mode.
Step 6: Once your computer is running in Safe Mode, uninstall any recently added games, drivers, or software.
Your computer will now be running in Safe Mode.
In Safe Mode, check if the error persists. If the error does not appear in Safe Mode, it indicates that a driver conflict or software issue is likely causing the problem.
1. Update the Driver
Updating the driver - Step by Step
Step 1: Open Device Manager. Press Windows + X and click on "Device Manager."
Open Device Manager
Step 2: Look for any driver that has a yellow exclamation mark or warning.
Open Device Properties
Step 3: Double-click on the driver to open its properties.
Go to the Driver tab and click on the Update Driver button.
Update Driver
Step 4: Select "Search automatically for drivers."
Automatically search for driver
Step 5: Follow the prompts to complete the process.
Step 6: If you receive a message saying "Windows could not install your driver," use another effective third-party tool to update/install all your drivers.
Windows could not install your device
2. Uninstall Recently Added Programs.
Uninstall Program
Step 1: Open Control Panel. Type "control" in the Run dialog and press Enter.
Step 2: Click on "Uninstall a program" under the Programs section.
Step 3: Right-click on unused or duplicate applications and select Uninstall.
Solution 3: Run the Memory Diagnostic Tool to Check for RAM Issues.
Indeed, MDSCHED.exe is a Windows Memory Diagnostic tool used to diagnose and find errors in your computer's RAM (Random Access Memory). Testing your RAM for errors can be helpful if you are experiencing system instability, crashes, or other issues that may be related to memory faults. Here’s how to use the Windows Memory Diagnostic Tool:
Run the Memory Diagnostic Tool
Step 1: Open the Run dialog by pressing Windows + R. Type mdsched.exe and press Enter.
Open the Memory Diagnostic Tool using the Run Window.
Step 2: Click on "Restart now and check for problems (recommended)."
Run the Memory Diagnostic Tool after restart.
Step 3: The memory testing process will begin upon reboot.
Step 4: The scan results will be displayed after you log into your computer. If the results are not displayed, you can view them in the Event Viewer application.
1. Click on the Start menu. Search for Event Viewer and open it.
2. Expand Windows Logs → System.
3. Click the "Find" button and search for Memory Diagnostic.
4. You will see the Memory Diagnostic results.
Solution 4: Run System Repair Commands
In Windows troubleshooting, you will find essential commands like chkdsk, sfc, dism, and fixboot. These tools are invaluable for detecting and fixing a range of system issues, such as corrupted system files, bad sectors on the disk, and corrupted Windows images. To effectively address Windows issues, it is recommended to execute these system repair commands within Windows Recovery Mode, where problems are diagnosed and resolved accurately.
SFC/Chkdsk/Dism - Step by Step
Step 1: Open Command Prompt as Administrator.
Open Command Prompt as Administrator in Windows 8, 10, and 11
Step 2: Now run the following commands one by one.
I. System File Checker Tool
sfc /scannow
II. Run the Dism command
Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth
III. Run the Disk Check Utility.
chkdsk /f c:
You will see the message:
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Yes / No)
Press Y and hit Enter. The disk check will start the next time your computer boots up.
Solution 5: Perform a System Restore
System Restore can indeed
